SINGLE & MULTI

TRIM ROLLFORMER

HAND FED & COIL FED

HIGH PRODUCTION MEETS FLEXIBILITY

ASC Trim Rollforming Lines deliver the increased throughput required by customers with higher product demand.

 

All of our trim lines are offered as complete coil-fed systems or as stand alone hand-fed rollformer.

ASC customers can choose between a dedicated Single Trim or a Multi Trim Rollforming line producing multiple profiles on a common set of shafts.

On top we offer a variety of options for all of our trim lines to increase your production rate.

Alpha Series Multi Trim Roll Former

MULTI TRIM ROLLFORMER

HAND FED

Trim Flying pre-Cut 27315 trans with sha

SINGLE TRIM ROLLFORMER

COIL FED WITH FLYING SHEAR

ASC 3-IN-1 Trim Rollformer

3-IN1 TRIM ROLLFORMER

FOR TRIM, FLAT SHEETS AND SLIT TRIM

ASC 3-IN-1 TriM Rollformer
Flat Sheets Trim Rollformer
ASC 3-IN1 Trim Rollformer reworked.jpg

Our new 3-IN-1 coil-fed Trim Rollforming Line allows Customers to produce Trim Profiles, Flat Sheets and slit Trim blanks on the same Machine.

This Front-End features an electro-mechanical Pre-Cut Shear and Slitter Pass with up to 9 sets of Knives.

The height adjustable Pre-Cut Conveyor directs the cut blanks either into the tooling or onto a flat belt Conveyor locate on top of the Rollformer base.

Slit Trim Blanks and Flat Sheets are then safely being transported to the exit end of the Rollformer.

Step up and experience a new Level of Performance, Quality and Flexibility - Made in USA!

MULTI-TRIM ROLLFORMER

Alpha Series Multi Trim Rollformer

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

Alpha Series Multi Trim Rollformer
Alpha Series Multi Trim Rollformer
Alpha Series Multi Trim Rollformer
Alpha Series Multi Trim Rollformer
Alpha Series Multi Trim Rollformer
Alpha Series Multi Trim Rollformer
Alpha Series Multi Trim Rollformer
ASC Alpha Series Multi Trim Roll Former

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

Alpha Series - Multi Trim Rollformer

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

Alpha Series - Multi Trim Rollformer

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

Alpha Series - Multi Trim Rollformer

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

Alpha Series - Multi Trim Rollformer

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

Alpha Series - Multi Trim Rollformer

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

Alpha Series - Multi Trim Rollformer

OSHA COMPLIANT SAFETY GUARDING

Alpha Series - Multi Trim Rollformer

CONTROL CONSOLE INCLUDES VARIABLE SPEED ADJUSTMENT

ASC Trim Rollformer

CONTROL CONSOLE INCLUDING VARIABLE SPEED ADJUSTMENT AND OPTIONAL PART COUNTER

ASC TRIM ROLLFORMER

OPTIONAL PART COUNTER

ASC Multi Trim Roll former

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

Alpha Series - Multi Trim Rollformer

Multi Trim Rollformer - Hand Fed, featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

ASC Multi Trim Rollformer (2)

ENTRY GUIDE ASC MULTI TRIM ROLLFORMER - HAND FED

Alpha Series - Multi Trim Rollformer

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

Alpha Series - Multi Trim Rollformer
Alpha Series - Multi Trim Rollformer

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

Alpha Series - Multi Trim Rollformer
Alpha Series - Multi Trim Rollformer
ASC Multi Trim Rollformer
ASC Multi Trim Rollformer

ASC MULTI TRIM ROLLFORMER - HAND FED

ASC Coil Fed Trim Rollforming Line M  (2)

10K Uncoiler and Pre-cut Shear

ASC Coil Fed Trim Rollforming Line M  (3)

Pre-Cut Conveyor for coil -ed production

ASC Coil Fed Trim Rollforming Line M  (1)

Trim Rollformer with side transfer to line up front end with multiple tooling sets

ASC Coil Fed Trim Rollforming Line M  (4)

Parallel Tooling for multiple profiles

Alpha Series Multi Trim Roll Former

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

Alpha Series Multi Trim Roll Former

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

Alpha Series Multi Trim Roll Former

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

Alpha Series Multi Trim Roll Former

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

Alpha Series Multi Trim Roll Former

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

Alpha Series Multi Trim Roll Former

Multi Trim Rollformer featuring multiple tooling sets, cast rollformer stands, cast bearings blocks, adjustable speed

SINGLE-TRIM ROLLFORMER

ASC Single Trim Rollformer

Rollformer for larger trim profiles (Corner, Ridge Cap, Rake, V-Valley, W-Valley), Handfed, feat. Cast Stands, Cast Bearings blocks, adjustable speed control

ASC Single Trim Rollformer

Entry Guide on linear rails, Rollformer for larger trim profiles (Corner, Ridge Cap, Rake, V-Valley, W-Valley)

ASC Single Trim Rollformer

Entry Guide on linear rails, Rollformer for larger trim profiles (Corner, Ridge Cap, Rake, V-Valley, W-Valley)

ASC Single Trim Rollformer

Trim Rollformer designed for larger trim profiles (Corner, Ridge Cap, Rake, V-Valley, W-Valley), Handfed, feat. Cast Stands, Cast Bearings blocks, adjustable speed control

ASC Single Trim Rollformer

Trim Rollformer designed for larger trim profiles (Corner, Ridge Cap, Rake, V-Valley, W-Valley), Handfed, feat. Cast Stands, Cast Bearings blocks, adjustable speed control

ASC Single Trim Rollformer

Trim Rollformer designed for larger trim profiles (Corner, Ridge Cap, Rake, V-Valley, W-Valley), Handfed, feat. Cast Stands, Cast Bearings blocks, adjustable speed control

ASC Single Trim Rollformer

Trim Rollformer designed for larger trim profiles (Corner, Ridge Cap, Rake, V-Valley, W-Valley), Handfed, feat. Cast Stands, Cast Bearings blocks, adjustable speed control

ASC Single Trim Rollformer

Cast stand with Micrometer Dial adjustment. Trim Rollformer designed for larger trim profiles (Corner, Ridge Cap, Rake, V-Valley, W-Valley), Handfed, feat. Cast Stands, Cast Bearings blocks, adjustable speed control

ASC Single Trim Rollformer
ASC Single Trim Rollformer

Trim Rollformer designed for larger trim profiles (Corner, Ridge Cap, Rake, V-Valley, W-Valley), Handfed, feat. Cast Stands, Cast Bearings blocks, adjustable speed control

ASC Single Trim Rollformer

Safety Guarding - Trim Rollformer designed for larger trim profiles (Corner, Ridge Cap, Rake, V-Valley, W-Valley), Handfed, feat. Cast Stands, Cast Bearings blocks, adjustable speed control

ASC Single Trim Rollformer

Trim Rollformer designed for larger trim profiles (Corner, Ridge Cap, Rake, V-Valley, W-Valley), Handfed, feat. Cast Stands, Cast Bearings blocks, adjustable speed control

ASC Single Trim Rollformer

CORNER TRIM with optional minor ribs

ASC Single Trim Rollformer

RIDGE CAP Trim Rollformer

ASC Single Trim Rollformer

W-Valley profile with optional minors and hems

COIL FED TRIM LINE_edited

W-Valley profile with optional beads and hems

ASC Single Trim Rollformer - coil fe

ASC Single Trim Roll Former - Uncoiler and Pre-Cut Shear for Coil Fed Production

ASC Single Trim Rollformer - Wall St

SINGLE TRIM ROLLFORMER FOR DRIP EDGE

ASC Single Trim Rollformer - Wall St

DRIP EDGE TRIM PROFILE

ASC Single Trim Rollformer - Wall Style

Rollformer for smaller trim profiles (J-Channel, Snow Guard, Eave trim, Z-Bar, Drip Edge), Handfed, Wall-Style Design, adjustable speed control

ASC Single Trim Rollformer - Wall Style

Rollformer for smaller trim profiles (J-Channel, Snow Guard, Eave trim, Z-Bar, Drip Edge), Handfed, Wall-Style Design, adjustable speed control

ASC Single Trim Rollformer - Wall Style

Rollformer for smaller trim profiles (J-Channel, Snow Guard, Eave trim, Z-Bar, Drip Edge), Handfed, Wall-Style Design, adjustable speed control

ASC Single Trim Rollformer - Wall Style

Rollformer for smaller trim profiles (J-Channel, Snow Guard, Eave trim, Z-Bar, Drip Edge), Handfed, Wall-Style Design, adjustable speed control

ASC Single Trim Rollformer - Wall Style

Rollformer for smaller trim profiles (J-Channel, Snow Guard, Eave trim, Z-Bar, Drip Edge), Handfed, Wall-Style Design, adjustable speed control

ASC Single Trim Rollformer - Wall Style
ASC Single Trim Rollformer - Wall Style

ASC Single Trim Rollformer - Wall Style - Eave Trim Profile

ASC Single Trim Rollformer - Wall St

ASC Single Trim Rollformer - Wall Style - Eave Trim Profile

ASC Single Trim Rollformer - Wall Style

ASC Single Trim Rollformer - Wall Style - Eave Trim Profile

ASC Single Trim Rollformer - Wall Style

ASC Single Trim Rollformer - Wall Style - Eave Trim Profile

TRIM ROLLFORMER

FEATURES & OPTIONS:

new-icon-with Letters trans 08-09-17 Ova

- Multi Trim Rollformer with Cast Stands & Cast Bearing Blocks

- Single Trim Rollformer with Cast Stands & Cast Bearing Blocks for larger profile shapes.

- Single Trim, cantilevered Wall-Style design for smaller Trim Profiles

 

- Hand-fed or coil-fed operation

- Feed-to-Stop or Flying Shear

- 3-IN-1 Option to produce Trim, Slit Blanks and Flat sheets

- Rollformer profiles for both residential and commercial applications

- Line Speed depending on application

- Linear shaft entry guide for accurate feed-in

- Up to 22-gauge steel capacity

- Ability to form teardrop hems in 80 ksi steel

- OSHA compliant safety guarding!

- Multi-batch controller option for Coil-Fed lines

- Control Console with Speed adjustment for

Hand-Fed lines

- Optional part counter for hand-fed lines

- Subplated tooling for additional profiles in the future

- Inhouse designed and manufactured roller die tooling 

- Absolute measurement on micrometer dials

- No special foundation required

SINGLE TRIM ROLLFORMER

LARGER PROFILES - HAND FED - CAST STANDS

SINGLE TRIM ROLLFORMER

SMALLER PROFILES - HAND FED - WALL STYLE

COMMON TRIM PROFILES:

- Corner

- Ridge Cap

- J-Channel

- Snow gaurd

- Rake

- FJ

- V-Valley

- W-Valley

- Eave Trim

- Angle Trim

- Drip Edge

- Z-Trim / Z-BAR

  • Facebook Social Icon
  • Linked IN