top of page

THE SELECT SERIES

TM

A PERFECT BALANCE OF
FLEXIBILITY - DURABILITY - PRODUCTIVITY 
ASC Panel Rollformer Background.jpg

ASC's Select Series lines are designed for customers with increased production needs and offered with speeds from 150 FPM up to 250 FPM.

With a design inspired by our workhorse Classic Series equipment, ASC Select Series panel lines provide an upgrade over competitive mid-level equipment.

ASC Select Series Roll Former Panel

SELECT SERIES - PRE-CUT

The Select Series is available as Pre-Cut or Post-Cut lines and offers additional features as for example subplated Tooling, Double Arm Uncoiler, flying Die Shears and more to improve throughput and efficiency, all at a reduced cost.

Step up into a Select Series line and experience the production of higher-end equipment at a value price.

SELECT SERIES - FLYING POST-CUT

SELECT SERIES T

UNCOILER
& COIL CAR

- Single Arm Uncoiler with 10,000 or 20,000 LB capacity

- Hydraulic Expansion

- Over and Under Feed Capability

- Powered Payoff with Loop Arm Control

- Coil Car (optional)

- Optional Double Arm Uncoiler for faster change overs

ASC 7-8 Corrugated Rollforming Line 1.jpg
ASC Double Arm Uncoiler
ASC Select Series Select a Hump

SELECT SERIES TM 

PRE-CUT
SHEARS

- Hydraulic 2-Post Pre-cut Shear

- Hydraulic Power Unit

- Select-A-Hump Table with variable speed feed roll and pre-cut conveyor

- Optional Gravity Fed Lubricator

- Optional 6-Roll Bender to reduce coil set

- OSHA compliant Safety Guarding

Select-A Hump 2 Post Die Set.jpg
SELECT CTL-SLITTING LINE (6) (1800x1200).jpg
3 Select-A Hump 4 Post Die Set.jpg

SELECT SERIES TM 

PRE-CUT OPTIONS

- 4 Post-Shear with 4-Post Die Set for Pre-Notching and Hole Punching on Standing Seam Profiles

- Optional Slitter Pass and side transfer for Pre-cut Conveyor to produce Trim Blanks and Flat Sheets directly from Coil

SELECT SERIES TM 

POST-CUT SHEARS

- Feed-to-Stop Hydraulic Post-Cut Shear for Single and Dual Height Lines

- 200 FPM Flying Post-Cut Shear with part seperation conveyor for increased throughput

- Profiled Shear Blades

- Manual or Hydraulic Shear Pre-Shear to avoid scrap

- Ability to cut short panel length

- Hydraulic Power Unit included

Select Series Dual height Post Cut Roll Former
Select Series 200 FPM Flying Cut-Off Shear
Select Series Dual height Panel Rollformer

SELECT SERIES TM 

ROLLFORMER

- Single Height or Dual Height Rollformer

- Cast Rollforming Stands with Cast Bearing Bearing Blocks

- 3” (76mm)Diameter Turned, Ground and Polished Shaft

- Absolute measurement on micrometer dials for precise adjustments

- Chain Drive System (Pass-to-Pass)

- Single Height Rollformer Base prepared for Dual Height conversion

ASC Select Series Rollformer TS 324
Select Series Subplated Tooling.JPG
Select Series Gearbox Drive Beam Subplated Tooling.JPG

SELECT SERIES TM

ROLLFORMER
OPTIONS

- Subplated Stands, Shafts and Tooling to allow the production of multiple profiles on the same line

- Gearbox Drive Beam and quick disconnect Couplers allow fast and easy change over

SELECT SERIES TM 

ROLLER DIE TOOLING

- Designed and manufactured in-house

- Proprietary Computerized Tooling Design
- 4150 Steel with Hard Chrome Finish (Standard)
- Optional 4150 Annealed or D2 Tooling 
- Machined Steel Tooling Spacers (no set collars)

TS 324 Tooling Roll Former.jpg
Select Series Corrugated Tooling.JPG
ASC Touchscreen Controller

SELECT SERIES TM 

CONTROLLER

ASC's 10" Multi Batch Controller comes with teh following features:

- Up/Download of orders via FTP or USB

- Intele-Key: Numeric Keypad to simplify input of length

- Intele-Edit: Tool keypad allowing copy/paste, move up/down to edit a cut list

- Intele-Stick: 4 position joystick to perform the majority of manual tasks needed for machine operation

- Intele-Coil: Coil calculator to estimate the weight or linear footage of a coil

- Intele-Cut to avoid scrap on Post-Cut Lines

- Access to Production Data & Coil Consumption

- EWON Remote Access capability allows fast Technical Support.

- ZEBRA Coil Tag & Bundle Tag Printer with ZEBRA wireless Scanner (optional)

- Optional AMS or Beck Controller

​

ASC coil tag scanner
ASC Roller Drop Stacker
Magnetic Dual Height Panel Stacker - ASC.jpg

SELECT SERIES TM 

PANEL
STACKING SYSTEMS

- ASC offers Roller Drop or Magnetic Panel Stacker in length of 20ft to 60ft

- Single or Dual Height depending on Panel Line

- Floor Tamper (optional)

- Side Transfer Conveyors (optional)

TS 324 Select Series Panel Line

COMMON WALL & ROOF
PANEL PROFILES

- AG Panel

- R Panel and PBR Panel

- Fake Standing Seam

U Panel

- RW/AW Panel

- 5V Panel

- TS-324 & PC 216 with Noching & Punching

- 1/4", 1/2" & 7/8" Corrugated

- 1.5 x 7.2 Panel / HR36

- Standing Seam with/without Pre-Notching

and many more!

- Lap Siding

- Shed Siding

- Wainscoting

- Soffit Panel

- B-Deck / Box Rib

- Metal decking

Select Series Panel Profiles

Are you also looking for a Ridge Cap Bender, Double Hemmer, Upender or other accessories then please click here

Ridge Cap Bender Side View L_edited.jpg
ASC Double Hemmer
ASC Upender

12 TOOLS every Rollforming Company should own! Learn More

ASC Calipers Measuring Panel Profile_edited.jpg
Protractor - ASC Machine Tools - Roll Forming Tools 2
Filler Gauge - ASC Rollforming Machine Tools 2

What's the right rollformer for me? Single Height, Dual Height or Subplated? Pre-Cut or Post-Cut? 

Read more

bottom of page